NEW ARRIVAL ANT MINER ABOUT 2000GH/S ANTMINER 63 PIECES OF 28NM CHIP BITCOIN MINER LOW WORKING TEMPERATURE AND NOISE BITCOIN 12
Hello Dear Friend:
Thank you for your visiting to my store,you can find the products you need from my store.
If there is not what you need, you can tell us,and we can help you to find the source.
please feel free to buy anything! In Stock ! Order Now.Buy 10 pieces ,Get 3% discount !
Shaltine
Product Introduction
Advantage:
2. Very low working temperature and noise
: S4 uses fins with customized, large radiating surface area. Front and rear double fan, lower fan speed to achieve the same cooling effect, significantly reduce noise.
3. Stability: 24 hours of continuous operation, outage probability minimization
4.Precise: samples detected HW (hardware error) probability is 0.03%
5.High efficiency: the wall power of mining speed ratio as low as 0.69J/GH
1. Bitmain’s AntMiner S4 combines the hashrate of nearly 5 S3s into a 3U rackmountable server. 160 BM1382 chips are spread across 4 mining boards and
are cooled with 4x120mm fans. The S4 is standalone and does not require an external controller.
Chips 160x Bitmain BM1382 Gen2
Hashrate ~2000GH
Rated Voltage 12V
Rated Current 117A
Power.Consumption 1400W
2. Powering
S4’s come with a internal 1400W custom power supply. Please note that in order to start the unit, you must press and hold the push button on the back
of the power supply.
3. Cooling
The S4 is self sufficient in cooling terms and utilises four 120mm unmarked PWM controlled fans which operate between 3500 and 4200rpm. All four are
automatically controlled by the software and react to increased temperatures. The fans spin at maximum RPM while the operating system loads which
is loud, and the unit itself is quite loud during operation but due to the shear volume of air displaced.
4.Case
The S4 is smaller than previous generations and is easy to lift and install. The aluminium case is held closed by 6 screws placed on the top for easy
access. Internally, the PSU’s compartment is separated from the mining area and cables are neatly routed out of the way. Please be careful when
replacing the case lid, that you make sure the grill on the lid is aligned with the PSU, else the PSU will be suffocated and may overheat.
5) Configuration
The S4 is standalone and does not require an external controller.
Wiring:
Plug in a power cable from the AntMiner to the mains.
Plug in an ethernet cable from the AntMiner to you router.
Configuration:
Make sure that your router’s subnet is 1, ie 192.168.1.x. If not then change it to 1, this is just temporary. If this is not possible, see below
Using a browser, navigate to 192.168.1.99 – this goes to the S3’s configuration page.
Login using “root” as both the username and password.
Navigate to Network -> Settings.
Change protocol to DHCP and click “Save & Apply”.
Using a browser, navigate to your router and find the IP it has assigned the S4 and navigate to that IP. This IP will also be displayed on the LCD.
Navigate to the page Miner Configuration -> General Settings. Enter your pool information in the below format.
Select “Beeper ringing” to “false” and click “Save & Apply”.
Navigate to the page “Miner Status” to check mining has started.
You can then change your router subnet back to whatever you are used to using.
Alternative Subnet Change:
Plug in an ethernet cable from the AntMiner to your computer.
Navigate to Control Panel -> Network and Sharing Centre -> Change Adapter Settings.
Right click on your ethernet adapter -> Properties.
Click on “Internet Protocol Version 4” and click properties.
Select “Use the following IP address” and enter the following:
IP Address: 192.168.1.1, Subnet Mask: 255.255.255.0, Default Gateway: 192.168.1.99.
Plug in an ethernet cable from the AntMiner to you router.
Restart the configuration instructions as above.
A shipped S4 weighs 16kg and the unit measures 432mm x 442mm x 133mm.
The rear of each hashing board is covered by a full cover aluminium heatsink, and the front by smaller curved finned heatsinks over the chips. Please be
careful when handling these heatsinks, they are extremely sharp.
Enjoy More Choice:
Must -Know Info
Remark: The following description is very important, please read carefully before buying. Happy Mining!
Shipping
1>We ship within 3-5 business days of purchase.
2>Shipment via DHL, Fedex, TNT and EMS. We choose delivery service according to destination countrys customs conditions and delivery conditions. For example, Only accept EMS for goods sending to Russian Federation/Belarus/Brazil/Ukraine.
Customs
1>If you have any specific and special requirements in terms of customs , please let us know when placing the order.
2>Because of customs conditions vary from country to country, If your goods was hold by your custom, Receiver is responsible for assisting customs clearance, we’ll do our best to help too. we are not responsible for any customs duties is charged.
3>If you need pro forma invoice with real value for like company reimbursement reasons, please let us know.
Returning policy
1>This is a new and special industry. Products once sold, returns and refunds are not accepted.we do not do refund the if price drops after the order is placed.
2>We provide 1 month warranty, but buyer is responsible for the return shipping cost.
3>Warranty invalid for damages caused by overclocking or unauthorized alteration.
Feedback
Feedback and comments are very much welcome and appreciated. That helps us grow and improve, we are most grateful if you leave whatever you want to say about our products and service.
Thanks for your look.
Best Quality, Free Shipping!
Please feel free to buy.
Shaltine
SINOSIGMA GROUP
- If you select worldwide free Shipping by China Post Ordinary Small Packet Plus,please note this shipping method can only be tracked in China process. If you ask the tracking information out of China, please contact us for tracking by hand.
- Orders processed within 4 days after payment is made and verification.
- We will arrange the shipment according to the address the buyer provided, So please confirm and check the address details you filled when purchase.
- The shipping method we offered is China Post Ordinary Small Packet Plus and China Post Air Mail, so if you want to choose DHL, UPS, FEDEX, TNT, EMS, please select them before purchase.
- Service Transit Time is provided by the carrier, weekends and holidays are excludes, so the shipping time may be longer than we promised, particularly during the holiday season, so please be patient.
- Any tracking information updated will inform you in time, you can also get the tracking information from official website.
Return - If you have returned the product to us, Please provide the tracking number to us.
- All returned items must be in the original packaging and condition.
- If the orders haven’t arrived in 60 days, please contact us, we will arrange a reshipment or a refund for you.
- If you want refund, please contact with our customer service and don’t open a dispute directly.
Feedback - Feedback is very important for us, we strive for 100% satisfaction, if you have any questions or problems, please contact us first , we will solve it quickly and in the best way.
- Please leave us positive feedback and give all 5 stars if you are satisfied with our products, your highly recommend is our motivate to move further, we will really appreciate your time if you left positive feedback.
Ohio Bitcoin
NEW ARRIVAL ANT MINER ABOUT 2000GH/S ANTMINER 63 PIECES OF 28NM CHIP BITCOIN MINER LOW WORKING TEMPERATURE AND NOISE BITCOIN 11
No comments:
Post a Comment