This miner had used three months, but still work fine,speed at 1100G-1150G,still good condition,have long life.
- Description
ANTMINER S5: The New Standard
Just over a year ago, Bitmain released its ground-breaking Antminer S1 to the market. Miners no longer had to sacrifice space, noise levels and hashing power in order to mine. The S1 became the staple of the home miner, before being upgraded to the Antminer S3 7 months later.
Today, Bitmain is proud to announce its 3rd generation chip in conjunction with its 9th product: the Antminer S5.NOW is 555USD per unit (excluding shipping) and will ship starting on December 27th.
1) Chip Specifications: BM1384
Bitmain’s 3rd generation Bitcoin mining ASIC, the BM1384 provides significant improvements over the previous BM1382 chip. Hashrate per mm2 at voltage 0.75V has been increased over 20% while reducing power consumption by 30%. This improvement is the result of months of hard work and investment in the Bitcoin ecosystem.
2) ANTMINER S5
Building upon the foundation from the S1 and S3, the Antminer S5 retains the same small form factor of previous miners, but, with the more efficient BM1384 chips. The S5 uses 1 fan for quieter home operation and features multiple improvements over the strong S3 design.
with power supply :
power supply:had used gold GX 600W
Send out include :
two pcs antminer S5
ONE PC 1300W power supply.
Specifications
Hash Rate: 1155 GH/s ±5%
Power Consumption: 590 W (at the wall)
Power Efficiency: 0.51 J/GH (at the wall)
Rated Voltage: 12V
Dimensions: 298 mm x 137 mm x 155 mm
Cooling: 1x 12038 fan
Operating Conditions: 0 °C to 35 °C
Certified By: FCC / CE
Network Connection: Ethernet
Notes
1.Power consumption figures vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.
2.PSU: A power supply unit is not included, and you will need to provide an ATX PSU. There are 4 PCI-e connectors for +12V DC input and all four are required. Do not connect more than one PSU to the same hashing board.
3. When better power efficiency is needed in the future due to higher network difficulties, you may want to buy some special PSUs 9V DC with more than 10A output, which will allow you to have a 0.2J/GH mining efficiency, but at lower hashing speed.
Ohio Bitcoin
Newest BTC miner Antminer S5 2400G with POWER SUPPLY two pcs a lot 28NM BM1384 Bitcoin Miner ASIC miner avalon dradon miner
No comments:
Post a Comment